Descripción
COMANDO CRX-LANEODR2K 2 Inch Neo Driver | 2000W Max
Build your horn-loaded system around the COMANDO CRX-LANEODR2K. This neodymium compression driver brings 2000W maximum power, an 8-ohm nominal impedance and a 2-inch throat with bolt-on mounting to your next audio project. Its published sensitivity is 114 dB/W/m. With a specially designed coil, you will not find a superior option for your competition project.
At the heart of the driver are a 3.5-inch voice coil, a high-polymer diaphragm and a neodymium magnet system with a listed flux density of 2.0 T. The published frequency range is 500 Hz to 8 kHz. Use these specifications to plan the driver’s role in a properly matched horn-loaded system.
Choose a compatible horn or waveguide and confirm its bolt pattern, throat interface and clearance before ordering. Use COMANDO-approved crossover and amplifier guidance for installation. The 2000W maximum figure is not a continuous RMS rating.
Product facts from the packaging
|
Field
|
Value
|
|
Model
|
CRX-LANEODR2K
|
|
Brand
|
COMANDO
|
|
Driver type
|
Neodymium compression driver
|
|
Throat diameter
|
2 inches (50 mm)
|
|
Mounting
|
Bolt-on
|
|
Nominal impedance
|
8 ohms
|
|
Maximum power
|
2000 watts
|
|
Sensitivity
|
114 dB/W/m
|
|
Frequency range
|
500 Hz to 8 kHz
|
|
Diaphragm
|
High polymer
|
|
Voice coil diameter
|
3.5 inches (90 mm)
|
|
Flux density
|
2.0 T
|
|
Published measurement
|
Diameter 140.5 mm × 80.5 mm
|
|
Magnet
|
Neodymium
|
Feature strip
2000W max | Neodymium magnet | 2-inch bolt-on throat | 3.5-inch coil
Retail call to action
Explore the CRX-LANEODR2K. Check your horn fit, review the specifications and build with COMANDO.
Trade inquiry line
Equipping an installation shop or distribution business? Contact COMANDO for approved account terms and product availability.
Does it fit any 2 inch horn
No. This driver has a 2-inch throat and bolt-on mounting. Confirm the horn or waveguide interface, bolt pattern, fasteners and physical clearance. Throat diameter alone does not establish compatibility. Check the selling offer for included accessories.
Is 2000W the continuous power rating
The packaging specifies 2000W maximum power. Ask COMANDO for the continuous RMS rating and recommended amplifier settings; do not use maximum power as the continuous amplifier target.
Can I set the crossover at 500 Hz
The listed 500 Hz to 8 kHz range is not a crossover recommendation. The safe high-pass setting depends on the horn, filter slope, operating level and manufacturer guidance. Confirm the recommended setup before use.
Is 114 dB the maximum loudness
No. The packaging lists 114 dB/W/m sensitivity, not maximum SPL. Horn loading and test conditions affect comparisons; this number does not prove that the driver is louder than a competing model.
|
Field
|
Value
|
|
custom.throat_inches
|
Decimal: 2
|
|
custom.mounting_type
|
Text: Bolt-on
|
|
custom.impedance_ohms
|
Integer: 8
|
|
custom.max_power_w
|
Integer: 2000
|
|
custom.sensitivity_note
|
Text: 114 dB/W/m
|
|
custom.frequency_range
|
Text: 500 Hz to 8 kHz
|
|
custom.voice_coil_inches
|
Decimal: 3.5
|
|
custom.diaphragm_material
|
Text: High polymer
|
|
custom.magnet_material
|
Text: Neodymium
|
|
custom.body_measurement
|
Text: Diameter 140.5 mm × 80.5 mm
|
Expand your COMANDO driver selection with the CRX-LANEODR2K: neodymium magnet, 2-inch bolt-on throat, 8 ohms and 2000W maximum power. Contact us about dealer or distributor account requirements, product availability and approved trade terms.
Explore COMANDO Trade Accounts
Send to the verified trade application or contact page; use Learn More.