Descripción
6MB-1200 | LOUDSPEAKER 6.5” MID RANGE HIGH POWER | 8 ohm | 2" COIL LARGE MAGNET
Shop the COMANDO 6MB-1200, a 6.5-inch midbass speaker with 1200W program power, 8-ohm impedance and a 2-inch CCAW voice coil. See specs and check fit.
PRODUCT DESCRIPTION
Give the midbass in your build its own dedicated driver. The COMANDO 6MB-1200 pairs a 6.5-inch frame with a 2-inch high-temperature CCAW voice coil and 1200W program power. Its published 100 Hz to 3 kHz response spans upper bass and midrange, making it a candidate for the section between your subwoofer and high-frequency drivers.
Planning an installation? Start with the 8-ohm nominal impedance, then check the mounting depth and cutout against your baffle. The stamped-steel frame and listed 95 dB sensitivity round out the specifications.
Quick specifications
|
Specification
|
Details
|
|
Nominal diameter
|
6.5-inch
|
|
Nominal impedance
|
8-ohm
|
|
Program power
|
1200W
|
|
Sensitivity
|
95 dB
|
|
Frequency response
|
100 Hz–3 kHz
|
|
Voice coil
|
2-inch
|
|
Voice coil wire
|
high-temperature CCAW wire
|
|
Frame
|
stamped-steel frame
|
CUSTOMER QUESTIONS
Is 1200W the continuous rating?
1200W is the program-power rating. Contact COMANDO for continuous-power and amplifier-matching guidance.
Will it fit an existing 6.5-inch opening?
Nominal diameter alone does not establish fit. Verify the cutout, bolt spacing and rear clearance before ordering.
Is 100 Hz the recommended crossover?
100 Hz is the lower end of the published frequency response. Ask for the recommended filter frequency and slope for your installation.