Description
12W1000 | MID RANGE LOUDSPEAKER 12” | 1000W | 8 ohm | 3" COIL REINFORCED MAGNET
Shop the COMANDO 12W1000, a 12-inch speaker driver with 1000W program power, 8-ohm impedance and a 3-inch CCAW voice coil. See specs and check fit.
Product description
Building or repairing an 8-ohm speaker cabinet? The COMANDO 12W1000 is a 12-inch speaker driver rated at 1000W program power. Its published response runs from 50 Hz to 5 kHz. A 3-inch voice coil wound with high-temperature CCAW wire sits inside a stamped-steel frame.
Planning an installation? Start with the 8-ohm nominal impedance, then check the mounting depth and cutout against your baffle. The stamped-steel frame and listed 96.5 dB sensitivity round out the specifications.
Quick specifications
|
Specification
|
Details
|
|
Nominal diameter
|
12 inches
|
|
Nominal impedance
|
8 ohms
|
|
Program power
|
1000W
|
|
Sensitivity
|
96.5 dB (measurement reference unspecified)
|
|
Frequency response
|
50 Hz–5 kHz
|
|
Voice coil
|
3 inches
|
|
Voice coil wire
|
High-temperature CCAW wire
|
|
Frame
|
Stamped-steel frame
|
Customer questions
Is 1000W the continuous rating?
1000W is the program-power rating. Contact COMANDO for continuous-power and amplifier-matching guidance.
Will it fit an existing 12-inch opening?
Nominal diameter alone does not establish fit. Verify the cutout, bolt spacing and rear clearance before ordering.
Is 50 Hz the recommended crossover?
50 Hz is the lower end of the published frequency response. Ask for the recommended filter frequency and slope for your installation.